News

With the continuous advancement and innovation of technology, in 2025, we witnessed a major revolution in building materials: smart anchors officially entered the market and quickly became a key factor in improving building safety and extending its service life. This technology not only represents a breakthrough in materials science but also signals the in-depth application of the Internet of Things (IoT) in the construction industry. I. What are Smart Anchors? Traditional anchors are primarily used to secure structural members to concrete or other substrates to provide the necessary support. So-called "smart" anchors, however, incorporate electronic components such as sensors and microprocessors to monitor their operating status and environmental changes in real time, transmitting this data to a remote monitoring center via wireless networks. This not only enables the timely detection of potential safety hazards but also provides a basis for maintenance. II. Technical Innovations 1. Self-sensing Capability: Built-in sensors for various types, such as temperature, humidity, and stress, enable anchors to self-diagnose. 2. Remote Monitoring: Utilizing LoRaWAN or other low-power wide area network technologies for long-distance communication, this ensures stable information reception even in remote areas. 3. Predictive Maintenance: Based on big data analysis algorithms, the system can proactively identify potential problems and provide recommended measures, effectively avoiding accidents. 4. Environmentally Friendly: Made from recyclable materials, this reduces environmental impact; its extended service life also indirectly reduces resource consumption. 3. Wide Application Scenarios From high-rise residential buildings to bridges and tunnels, from wind turbine towers to offshore platforms...smart anchors have applications in virtually every area requiring high-strength connections. Products capable of autonomously monitoring health conditions are particularly important in facilities operating under extreme conditions. 4. Future Outlook With the widespread adoption of the smart city concept and the development of 5G technology, smart anchors are expected to become increasingly prevalent and their functionality will become increasingly powerful in the coming years. For example, they can integrate AI technology for more accurate data analysis, or integrate with other smart devices to form a comprehensive safety and protection system. In short, the smart anchors of 2025 will not only represent a technological leap forward, but also a significant force driving the entire construction industry's transformation towards intelligent systems. It allows us to see a brighter future that is safer, more reliable, more efficient and energy-saving.

Recently, the kiln industry has ushered in a new wave of development. It is reported that Puyu Kiln Technology Jiangsu Co., Ltd. has launched a new style of high-efficiency and energy-saving kilns, which has attracted widespread attention in the market. This kiln uses advanced combustion technology and intelligent control systems to maximize combustion efficiency and significantly reduce energy consumption. Compared with traditional kilns, this kiln also has more stable temperature control and higher production efficiency, which can greatly improve the production line's production capacity and production quality. In addition to technological innovation, this kiln also has a completely new upgrade in design. The appearance is fashionable and simple, easy to operate, and meets the aesthetic needs of modern factories. It has been well received by factory supervisors and workers. It is reported that this new type of kiln has been put into use in some large factories and has achieved significant energy-saving effects and production benefits. Industry insiders said that with the continuous innovation and breakthroughs in kiln technology, the kiln industry is expected to usher in more prosperous development prospects and provide more reliable and efficient heating equipment for industrial production.

In recent years, kiln technology has been widely used and developed in various industries. As an important heat treatment equipment, kilns not only play an important role in traditional industries such as metallurgy, building materials, and chemicals, but are also widely used in emerging industries, such as new energy, environmental protection and other fields. On the one hand, kiln technology continues to innovate in traditional industries. With the advancement of technology and improvements in technology, the efficiency and performance of kilns have been greatly improved. For example, in the metallurgical industry, the emergence of new high-temperature furnaces has made metal smelting and heat treatment more efficient and energy-saving. In the building materials industry, innovations in kiln technology have made the production of cement, ceramics and other materials more environmentally friendly and efficient. In the chemical industry, the development of kiln technology has improved the control of chemical reactions and the purity of products. On the other hand, the application of kiln technology in emerging industries has also attracted widespread attention. As the global demand for renewable energy continues to increase, the application of kiln technology in new energy fields such as solar energy and wind energy is also increasing. For example, solar kilns use solar energy for heating and high-temperature processing of materials, which can not only meet the demand for green energy, but also reduce energy consumption and environmental pollution. In addition, kiln technology also plays an important role in the field of environmental protection. For example, garbage incineration kilns can burn garbage at high temperatures, realize resource recovery and energy utilization, and effectively reduce the pollution of garbage to the environment. With the continuous advancement of technology and the expansion of applications, kiln technology still faces some challenges. First, the energy consumption and environmental pollution problems of kilns still exist. Although new kiln technologies can improve energy efficiency and reduce pollutant emissions, further improvements and innovations are still needed. Secondly, the degree of automation and intelligence of kiln technology is relatively low, and more automation equipment and intelligent control systems are needed to improve production efficiency and product quality. Overall, the innovation and development of kiln technology has brought huge opportunities and challenges to traditional and emerging industries. With the continuous advancement of science and technology and changing needs, kiln technology will continue to usher in new breakthroughs and developments. It is believed that through continuous innovation and cooperation, kiln technology will make greater contributions to the development of all walks of life.

High corrosion resistance, easy processing and beautiful appearance, it is currently the most commonly used standard connector. So what types does it contain? See below for details: 1. Bolt: This is a type of fastener consisting of a head and a screw; 2. Stud: This is a type of fastener that has no head and only has external threads at both ends; 3. Screw: This is also a type of fastener consisting of two parts: the head and the screw; 4. Stainless steel nut: with internal threaded holes, generally in the shape of a flat hexagonal column, it is usually used with bolts, studs or machine screws to fasten into a whole connection 5. Self-tapping screw: similar to machine screw, it is mainly used to fasten and connect two thin metal components into a whole component; 6. Wood screw: It is also similar to machine screws and can be directly screwed into wooden components to fasten the components together. 7. Washer: A type of fastener in the shape of an oblate ring, which prevents the nut from loosening. 8. Retaining ring: it is installed in the shaft groove of the equipment, which plays a role in preventing the parts from moving left and right. 9. Pin: It is mainly used for positioning parts and for locking other fasteners. 10. Rivet: A type of fastener consisting of a head and a shank. 11. Assembly: refers to a type of fastener supplied in combination. 12. Welding studs: heterogeneous fasteners composed of light energy and nail heads.

Spiral bars, also known as spiral stirrups, are steel bar components that continue as a whole. The steel bar skeletons bound and formed by screw hoops are tightly combined in many triangles, and their stability is outstanding, reliable and strong. In the process of concrete pouring and tamping, the products can ensure that the steel products can withstand severe disturbances, collisions and tramples without losing shape or deformation. Spiral reinforcement is often used together with prestressed plastic bellows, prestressed steel bars and other materials. Due to the advantages of low cost and convenient installation, spiral reinforcement is used together with prestressed materials in bridges, railways, tunnels and other projects. Everyone has a way: the important thing is to see whether the color of the spiral bar is the regular silver color, which is generally the color of the genuine product. Nowadays, many small manufacturers will use some low-hardness steel instead of high-quality steel when making counterfeit spiral bars. After the steel is manufactured, no problem can be seen from the appearance alone, but many experienced friends will find that these poor-quality products have some small black spots inside their steel rings. These small black spots are left by some sundries in the inferior steel. The spiral bars made of normal high-quality carbon chromium steel will not have such a situation, so when we encounter such spiral bars, no matter their No matter how low the price is, don't buy it. These products have a very short lifespan during use, and sometimes they don't work at all.

Classification and scope of application of post-anchor technology 1.1 Types of post-anchor technology Anchor bolts are the general term for all post-anchor components, and they are anchor components that anchor the connected parts to concrete and other underlying materials. According to the different working principles and structures of anchor bolts, there are great differences in anchoring performance and scope of application. In China, they are usually divided into four categories: (1) Expansion anchor bolts: use expansion parts to squeeze the wall of the anchor hole to form an anchor Functional anchor. In detail, it is divided into: torque control expansion anchor and displacement control expansion anchor. (2) Reaming type anchor bolt: An anchor bolt that forms an anchoring effect through the locking key between the bottom reaming hole of the anchor hole and the anchor bolt expansion part. In detail, it is divided into: pre-expanding ordinary plugs and self-expanding special plugs. (3) Bonded anchor bolt: also known as chemical bonded bolt, the screw and internal threaded pipe are cemented and fixed in the borehole of the concrete base material with a special anchor glue, and the adhesive is bonded between the screw and the concrete hole wall. Bonding and keying effect to achieve a component that is anchored to the connected key. Shaped bonded anchor bolts are generally thick and short, with shallow anchor depth, poor adaptability to substrate cracks, and poor performance. Currently, they are only suitable for equipment fixing, guardrail installation, steel structure (curtain wall) installation and other installation projects Adhesive anchors. The biggest difference between chemical anchor bolts and expansion and reaming bolts is that expansion bolts are fixed by mechanical means, while chemical anchor bolts are fixed by chemical agents. Once the chemical agent is heated, it is easy to cause the agent to fail. Therefore, when using chemical anchor bolts for fixing, it is necessary to avoid chemical anchor bolts from being heated during electric welding. (4) Chemical planting bars: referred to as planting bars, is a post-anchor connection technology widely used in domestic engineering circles. It uses chemical adhesives (anchor glue) to bond ribbed steel bars and long screws to concrete substrates. In the anchor hole, through the action of bonding and locking keys, a post-anchor rooting component for anchoring the connected parts is realized. Because the length of the chemical planting bar is not limited, it is similar to the anchoring of the cast-in-place concrete steel bar. The failure state is easy to control, and generally can be controlled as the anchoring steel bar failure. The steel bars used as chemical planting bars generally have better anchoring performance with ordinary hot-rolled ribbed steel bars, and the smooth round steel bars are poor. The technological process is relatively simple: drilling -> hole clearing -> compounding glue -> planting reinforcement -> curing -> inspection and acceptance. Aperture D = d + (4 ~ 10) mm. Other types: Concrete screws, anchors for thermal insulation systems, and traditional nails, concrete nails, etc. also belong to the category of post-anchor technology and are widely used. 1.2 Scope of application The selection of anchor bolts should not only consider the performance differences of the anchor bolts, but also consider the properties of the base material, the force properties of the anchor connection (tension, compression, middle shear, and edge shear), and the structure to be connected. The comprehensive influence of factors such as type (structural components, non-structural components), whether there are seismic fortification requirements, etc. (1) In addition to chemical reinforcement, most of the existing mechanically shaped anchors (including expansion anchors, reaming anchors, bonded anchors and concrete anchors, etc.) are mainly used in non-structural components The post-anchor connection is used in a small number of post-anchor connections for structural members subject to compression, middle shear, and combination of compression and shear, and shall not be used for structural members subject to tension, edge shear, and combined tensile and shear forces, and non-structural members of lifeline engineering. post-anchor connection. (2) The chemically planted bars and screws that meet the anchorage depth requirements can be used for post-anchoring connections of structural members and non-structural members that are subject to tension, edge shear, and tension-shear composite forces with a seismic fortification intensity not greater than 8 degrees.

The utility model discloses a fire-resistant anchoring brick, which comprises a connecting part, a groove, a hole end, a protective layer, a hanging hole, a hanging head, a brick body, a set seat, a reinforcing layer, a base layer, a fire-resistant shell, a protective layer, a fire-resistant layer Layer and reinforcement core. The steel bar passing through the hanging hole can be protected by the protective layer and groove, the surface of the steel bar can be protected by providing a protective layer, and the firmness of the hanging head can be improved, and then the protective material can be installed inside the hole end, which can Protect the steel bars at both ends of the hanging holes, prevent the steel bars and the brick body from affecting the overall strength due to thermal expansion and cold contraction, and improve the overall firmness of the anchor bricks; a refractory shell can be formed by smearing a layer of refractory material on the surface of the brick body, and then pass through the refractory layer. The fire resistance of the brick body can be improved, the internal strength of the brick body can be improved through the reinforcement layer, and the compressive and shear resistance of the brick body can be enhanced by installing the reinforcement core inside the reinforcement layer, and the protective layer can be placed on the reinforcement layer and reinforced. The core avoids corrosion, which affects the strength of the brick body.

Introduction of Y-type anchors Sales of Y-type anchor nails for boilers, detailed introduction of Y-type anchor nails for fluidized bed boilers Anchor, V-anchor, Y-anchor, Anchor Nail, V-anchor, Y-anchor, pin, V-pin, Y-pin, claw, V-claw, Y-claw, grab Nails, V-shaped nails, Y-shaped nails introduced and sold Y-type anchoring nails are structural parts that connect and fix light-weight refractory materials such as ceramic fibers, light-weight insulating bricks, and unshaped refractory materials with the metal wall panels of the kiln. According to the structure of the industrial kiln, the temperature of the furnace, and the ambient atmosphere, anchors of different structures and materials should be selected for Y-type anchoring nails. Y-type anchor nails are the anchors used for refractory materials in the temperature range of 800℃-1400℃. Features Anchor, V-anchor, Y-anchor, Anchor Nail, V-anchor, Y-anchor, pin, V-pin, Y-pin, claw, V-claw, Y-claw, grab Nails, V-shaped nails, Y-shaped nails for sale Anchor, V-anchor, Y-anchor, Anchor Nail, V-anchor, Y-anchor, pin, V-pin, Y-pin, claw, V-claw, Y-claw, grab Nail, V-type grab nail, Y-type grab nail commonly used specification table Diameter 4(mm)─24(mm) Height 20(mm)─450(mm) Plate Nail Thickness 2(mm)─10(mm) Width 10(mm)─40(mm) Height 20(mm)─450(mm) Anchor, V-anchor, Y-anchor, Anchor Nail, V-anchor, Y-anchor, pin, V-pin, Y-pin, claw, V-claw, Y-claw, grab Nails, V-shaped nails, Y-shaped nails are suitable for a wide temperature range: 800℃-1400℃. Various forms of anchors: inline, cross, L, Y, V, etc. The anchoring structure is reasonable, and the anchoring is firm and reliable. Easy and fast installation. The material of Y-type anchoring nails involves 201, 301, 304, 304L, 321, 316, 316L, 310S, 309S, and non-standard materials can be customized according to requirements. Stainless steel anchors are widely used in boilers, power plants, fluidized bed boilers, furnaces, kilns, industrial kilns, power plants, cement plant equipment linings, etc. You are welcome to inquire! The company also supplies similar products of the above products: anchors, V-anchors, Y-anchors, anchor nails, V-anchors, Y-anchors, pins, V-pins, Y-pins, claw nails, V-type anchors Type claw nail, Y type claw nail, grasping nail, V type grasping nail, Y type grasping nail

Huainan, Anhui is known as the "Hometown of Anchoring", and anchoring agents are widely used in various fields of engineering construction. Huainan Xiejiaji District is one of the main production bases for anchoring agents in Huainan. Relying on the production enterprises, the direction and measures for extending, supplementing and strengthening the chain of the anchoring agent industry chain have been clarified, and by strengthening policy support, optimizing the business environment, and strengthening supporting upstream and downstream industries, the anchoring industry has been continuously guided to further cluster development.

The anchor is mainly used to fix the refractory lining, which plays the role of anchoring and connection, and can improve the service life of the castable as the lining. The types of anchors are divided into metal and non-metal: metal anchors include anchoring supports, thrust pieces, and anchoring nails; non-metallic anchors include anchoring bricks with holes, hanging bricks, and refractory fiber lining anchoring nails. There are many shapes of anchors, including V-shaped, U-shaped, Y-shaped, mesh-shaped, π-shaped, etc. The most commonly used shapes are V-shaped and shaped. It does not exceed 50mm, and there are more meshes with mesh-shaped tortoises. Some special parts of the π type are not used a lot. The shapes and connection methods of anchoring bricks are also various, and the sizes are also different. The most commonly used anchoring bricks have heights of 330mm, 380mm, 440mm and 500mm, but the anchoring bricks have holes and no holes. , The ones with holes are generally used on the furnace wall, and the ones without holes are used on the top of the furnace, which is the so-called hanging method, so it can also be called hanging bricks. The material of anchoring bricks generally uses more grade 3 high alumina bricks, because the grade 3 high alumina bricks have good flexibility. There are also second-level high-alumina bricks and first-level high-alumina bricks, but this is determined according to the service temperature of the furnace lining and the quality of the refractory castables. The materials used for metal anchors include ordinary steel and 1Cr18Ni9 steel. Some high temperature and key parts use 2520 heat-resistant steel to make metal anchors of different shapes. Metal supports and thrusts are preferably made of heat-resistant steel. General steel is easy to rust, and metal anchors are easy to oxidize at high temperatures. They are buried in the castable lining during construction, and the distance between the hot end and the working surface of the lining castable is 20-40mm, that is, Must be below the surface of the castable. Metal anchors need to be welded. Welding is to be fully welded, and there must be no false welding or missing welding; while the anchor brick is mainly free of cracks, and the size must be accurate. The optimization of anchors and anchoring bricks is different in shape, which is more conducive to the service life of the furnace lining.

Anchors---Introduction Anchor Introduction Sales of Y-type nails, detailed introduction of Y-type nails Anchor, V-anchor, Y-anchor, Anchor Nail, V-anchor, Y-anchor, pin, V-pin, Y-pin, claw, V-claw, Y-claw, grab Nails, V-shaped nails, Y-shaped nails for sale There are many shapes of Y-type gripping nails, such as Y-type, V-type, T-type, S-type, etc., which are refractory castables, refractory plastics and refractory spray coatings used to support and fix thinner linings. Which shape of metal anchor to use depends on the structure of the lining. The shape of the anchor. The upper and lower ends must be flat, and the other four sides are toothed to increase the occlusal area and friction with the lining body, and play a role of suspension and support. Arrangement and spacing The arrangement and spacing of the high temperature resistant nails depends on the shape of the furnace shell or components, the material (density) and thickness of the lining, the operating temperature and conditions (continuous and intermittent), and the thermal and mechanical stress. The arrangement of the high temperature resistant nails must be considered to have sufficient support strength without causing long cracks in the refractory material during thermal expansion and contraction.

Analysis of the leading ranking of complete sets of equipment stocks, what is the price of complete sets of equipment stocks today? (2022/1/29) Complete equipment leading stock: Boshi shares: The leading stock of complete sets of equipment, according to the news on January 29, Boshi shares opened at 11.65 yuan and closed at 11.56 yuan, down 0.77%. The highest price of the day was 11.72 yuan, and the price-earnings ratio was 29.16. The company achieved revenue of 546 million in the third quarter of 2021, a year-on-year increase of 28.64%; net profit was 135 million. The products are mainly used in the post-processing of solid materials in petrochemical, coal chemical, salt chemical, fine chemical, fertilizer, metallurgy, logistics, food, feed and other industries, including stand-alone products, unit products and complete sets of equipment, which can meet the needs of customers at multiple levels, full range of needs. Others in the complete equipment stock are: Zhongcheng shares: On January 29, the stock price of Zhongcheng shares fell by 2.9% within 5 days, and the increase this year fell by -8.7%. The latest report was 7.93 yuan, and the price-earnings ratio was -8.07. Zoomlion: According to the news on January 29, Zoomlion's latest quotation was 7.05 yuan, and the stock price fell 2.13% within 3 days; the increase this year fell -2.27%, and the price-earnings ratio was 7.19.